Hardness
Soft
17.3 PPM · 1 GPG
Local water dashboard
Official source aggregationWater quality in Clanton, AL 35045
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Chilton County.
No active health-based violation reported
- Primary matched system
- Clanton, The Ww & Sb Of The City Of
- Source water
- Surface water
- County
- Chilton County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 13,500 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
17.3 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
17.3
mg/L as CaCO₃ equivalent
Grains per gallon
1
1 GPG ≈ 17.1 PPM
What this means at home
At 17.3 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
19
Nearest site
4.4 mi
Observation range
Jun 24, 2019–Aug 10, 2022
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Well NAWQA FLH 30 Chilton County Al (Well).USGS source documentation ↗
Regional context
Is 35045 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Clanton median
17 PPM
About the same3 indexed ZIP readings · Range 17.3–18.3 PPM
Alabama median
38 PPM
21 PPM lower406 indexed ZIP readings · Range 7.4–2810 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 3
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | AL0000213 | Resolved | Jan 11, 2026through Jan 12, 2026 |
| Chlorite | AL0000213 | Resolved | Oct 1, 2022through Dec 31, 2022 |
| Chlorite | AL0000213 | Resolved | Jul 1, 2022through Sep 30, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Clanton ZIP 35045 using 17.3 PPM nearby hardness and 1 reported measurement benchmarks.
No urgent match
Start with an independent water test
This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.
Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Compare ZIPs in Clanton
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
Water questions for Clanton
Is tap water safe in Clanton?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 17.3 PPM, or 1 grains per gallon, classified as soft. This is not a household tap measurement.
Do I need a water softener?+
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.