Skip to content

Local water dashboard

Official source aggregation

Water quality in Chloride, AZ 86431

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Mohave County.

No active health-based violation reported
Primary matched system
Chloride Dwid
Source water
Groundwater
County
Mohave County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

304 PPM · 17.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

9.3e-4 mg/L

6% of action level

Utility match

1 system

Serves 350 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

304 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

304

mg/L as CaCO₃ equivalent

Grains per gallon

17.8

1 GPG ≈ 17.1 PPM

What this means at home

At 304 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

14

Nearest site

38 mi

Observation range

Oct 10, 2017–Apr 22, 2024

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: B-29-15 25BCC1 [HUALAPAI TEST WELL] (Well).USGS source documentation ↗

Regional context

Is 86431 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Chloride median

304 PPM

About the same

1 indexed ZIP readings · Range 304–304 PPM

Arizona median

241 PPM

63 PPM higher

285 indexed ZIP readings · Range 66.4–1250 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

9.3e-4 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 9.3e-4

EPA limit 0.015

Local level is 6% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
TTHMAZ0408005ResolvedJan 1, 2024through Aug 8, 2024
Total Haloacetic Acids (HAA5)AZ0408005ResolvedJan 1, 2024through Aug 8, 2024
Revised Total Coliform RuleAZ0408005ResolvedJan 1, 2023through Feb 17, 2023
ChlorineAZ0408005ResolvedJul 1, 2022through Sep 30, 2022
Revised Total Coliform RuleAZ0408005ResolvedApr 1, 2021through May 26, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Chloride ZIP 86431 using 304 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

304 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Chloride

Is tap water safe in Chloride?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 304 PPM, or 17.8 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 304 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.