Hardness
Very Hard
189.5 PPM · 11.1 GPG
Local water dashboard
Official source aggregationWater quality in Lemoore, CA 93245
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Kings County.
1 reported benchmark flag
- Primary matched system
- Lemoore, City Of
- Source water
- Groundwater
- County
- Kings County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 27,185 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
189.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
189.5
mg/L as CaCO₃ equivalent
Grains per gallon
11.1
1 GPG ≈ 17.1 PPM
What this means at home
At 189.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
396
Nearest site
5.1 mi
Observation range
Jan 11, 2016–Jun 10, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 019S020E24A001M (Well).USGS source documentation ↗
Regional context
Is 93245 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Lemoore median
190 PPM
About the same1 indexed ZIP readings · Range 189.5–189.5 PPM
California median
189 PPM
About the same678 indexed ZIP readings · Range 3.3–728.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0
EPA limit 0.015
TTHM
Measured in MG/L
Local 0.205
EPA limit 0.08
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 17
- Health-based
- 14
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | CA1610005 | Unaddressed | Jul 2, 2025 |
| TTHMHealth-basedReported 0.205 MG/L · MCL 0.08 | CA1610005 | Archived | Apr 1, 2024through Jun 30, 2024 |
| TTHMHealth-basedReported 0.183 MG/L · MCL 0.08 | CA1610005 | Archived | Jan 1, 2024through Mar 31, 2024 |
| TTHMHealth-basedReported 0.195 MG/L · MCL 0.08 | CA1610005 | Archived | Oct 1, 2023through Dec 31, 2023 |
| TTHMHealth-basedReported 0.188 MG/L · MCL 0.08 | CA1610005 | Archived | Jul 1, 2023through Sep 30, 2023 |
| TTHMHealth-basedReported 0.17 MG/L · MCL 0.08 | CA1610005 | Archived | Apr 1, 2023through Jun 30, 2023 |
| TTHMHealth-basedReported 0.163 MG/L · MCL 0.08 | CA1610005 | Archived | Jan 1, 2023through Mar 31, 2023 |
| TTHMHealth-basedReported 0.158 MG/L · MCL 0.08 | CA1610005 | Archived | Oct 1, 2022through Dec 31, 2022 |
| TTHMHealth-basedReported 0.16 MG/L · MCL 0.08 | CA1610005 | Archived | Jul 1, 2022through Sep 30, 2022 |
| TTHMHealth-basedReported 0.17 MG/L · MCL 0.08 | CA1610005 | Archived | Apr 1, 2022through Jun 30, 2022 |
| Nitrate | CA1610005 | Archived | Jan 1, 2022through Dec 31, 2022 |
| TTHMHealth-basedReported 0.17 MG/L · MCL 0.08 | CA1610005 | Archived | Jan 1, 2022through Mar 31, 2022 |
| TTHMHealth-basedReported 0.18 MG/L · MCL 0.08 | CA1610005 | Archived | Oct 1, 2021through Dec 31, 2021 |
| Consumer Confidence Rule | CA1610005 | Resolved | Jul 1, 2021through Dec 8, 2023 |
| TTHMHealth-basedReported 0.15 MG/L · MCL 0.08 | CA1610005 | Archived | Jul 1, 2021through Sep 30, 2021 |
| TTHMHealth-basedReported 0.173 MG/L · MCL 0.08 | CA1610005 | Archived | Apr 1, 2021through Jun 30, 2021 |
| TTHMHealth-basedReported 0.178 MG/L · MCL 0.08 | CA1610005 | Archived | Jan 1, 2021through Mar 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Lemoore ZIP 93245 using 189.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
189.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Lemoore
Is tap water safe in Lemoore?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 189.5 PPM, or 11.1 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 189.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.