Utility-reported hardness
Unavailable
Ask your provider or test your tap
Local water dashboard
Official source aggregationRegional hardness evidence, possible serving systems, EPA compliance history, and the measurements that are—and are not—available for Jefferson County.
Your tap water
Match the utility name to your water bill. These results describe the utility’s water, not a test at your home. A ZIP can include several water systems.
Utility hardness unavailable in this index
Nearby river or groundwater samples cannot tell us the hardness coming out of your tap. Ask your water provider for total hardness as CaCO₃, or test it at home.
Find an official utility report →At a glance
EPA quarter 2026Q2
Utility-reported hardness
Unavailable
Ask your provider or test your tap
All possible systems
No active flag
0 active health-based records
Measurements by utility
Each result belongs to a specific system.
Utility match
1 system
Serves 171,610 people system-wide
Match the name on your water bill
These are possible serving systems. A record for one system does not apply to every home in this ZIP. Confirm your provider before interpreting a measurement or notice. Federal records can lag current utility notices.
EPA snapshot: 2026Q2. Historical window begins Jan 1, 2021.
CO0130001 · Surface water · 171,610 people served system-wide
A municipal system, in-state city, and served county all agree with this Census ZCTA.
No active health-based record in this imported snapshot
Find this utility’s official report →An action level is a regulatory trigger, not a pass/fail health boundary. A reported zero is the value in the source record and does not establish that lead is absent at your tap.
EPA SDWIS Lead and Copper Rule samples
21% of the listed benchmark
Monitoring period: Jan 1, 2023 to Dec 31, 2025
| Rule | Status | Period |
|---|---|---|
| Interim Enhanced Surface Water Treatment Rule | Resolved | Jun 1, 2024 to Jun 28, 2024 |
| Interim Enhanced Surface Water Treatment Rule | Resolved | May 1, 2024 to May 31, 2024 |
| Surface Water Treatment Rule | Resolved | Mar 1, 2024 to Mar 31, 2024 |
| Surface Water Treatment Rule | Resolved | Feb 1, 2024 to Feb 29, 2024 |
Hardness meter
349
PPM as CaCO₃
Very Hard
PPM
349
GPG
20.4
Regional environmental evidence
USGS hardness classification scale
349 PPM
Parts per million
349
mg/L as CaCO₃ equivalent
Grains per gallon
20.4
1 GPG ≈ 17.1 PPM
How to use regional evidence
These samples describe nearby environmental water. They cannot establish whether your tap water is soft or hard. Use a utility result or a tap test for appliance settings and treatment sizing.
USGS sites used
1
Nearest site
10.3 mi
Observation range
May 8, 2026–May 8, 2026
Regional evidence confidence
Low
Median of the latest source-type-aligned hardness observation at each monitoring site within 25 miles. Nearest monitoring location: CHERRY CREEK AT DENVER, CO. (Stream).USGS source documentation ↗Evidence tier: Regional environmental evidence. This value is not used as proof of the serving utility's treated-water hardness.
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Arvada median
349 PPM
About the same5 indexed ZIP readings · Range 177.8–349 PPM
Colorado median
349 PPM
About the same153 indexed ZIP readings · Range 7.2–2135 PPM
Evidence-first next steps
This profile can help you ask the right question. It cannot select equipment for a property without a current result from the serving utility or the tap.
ZIP boundaries and utility service areas do not perfectly match. Verify the system on a water bill before relying on system-wide records.
Use the current Consumer Confidence Report for treated-water results and official notices.
Find an official utility report →Use a tap hardness test before sizing a softener. For health concerns, use a certified laboratory and the correct sampling protocol.
Convert your hardness test result →Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Utility-reported hardness is unavailable in this index. Regional samples do not establish tap-water hardness. Ask your provider or test your tap.
Confirm hardness at your tap and consider actual scale or spotting before choosing treatment. Regional environmental values cannot determine whether you need a softener. A softener addresses hardness, not every contaminant.