Skip to content

Local water dashboard

Official source aggregation

Water quality in Fort Lauderdale, FL 33312

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Broward County.

No active health-based violation reported
Primary matched system
Sunrise Southwest
Source water
Groundwater
County
Broward County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

280 PPM · 16.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0099 mg/L

66% of action level

Utility match

1 system

Serves 10,750 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

280 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

280

mg/L as CaCO₃ equivalent

Grains per gallon

16.4

1 GPG ≈ 17.1 PPM

What this means at home

At 280 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

115

Nearest site

4.3 mi

Observation range

Jun 6, 2016–Jan 27, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: S -1505 (Well).USGS source documentation ↗

Regional context

Is 33312 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Fort Lauderdale median

280 PPM

About the same

10 indexed ZIP readings · Range 280–281 PPM

Florida median

280 PPM

About the same

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0099 mg/L

Reported Dec 1, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0099

EPA limit 0.015

Local level is 66% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
25
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleFL4064326ArchivedAug 1, 2025through Aug 31, 2025
Revised Total Coliform RuleFL4064326ArchivedJul 1, 2025through Jul 31, 2025
Consumer Confidence RuleFL4064326UnaddressedJul 1, 2025
Revised Total Coliform RuleFL4064326ArchivedJun 1, 2025through Jun 30, 2025
Revised Total Coliform RuleFL4064326ArchivedApr 1, 2025through Apr 30, 2025
Revised Total Coliform RuleFL4064326ArchivedMar 1, 2025through Mar 31, 2025
Revised Total Coliform RuleFL4064326ArchivedFeb 1, 2025through Feb 28, 2025
Revised Total Coliform RuleFL4064326ArchivedJan 1, 2025through Jan 31, 2025
Revised Total Coliform RuleFL4064326ArchivedDec 1, 2024through Dec 31, 2024
Revised Total Coliform RuleFL4064326ArchivedNov 1, 2024through Nov 30, 2024
TTHMFL4064326ArchivedOct 1, 2024through Dec 31, 2024
Revised Total Coliform RuleFL4064326ArchivedOct 1, 2024through Oct 31, 2024
Total Haloacetic Acids (HAA5)FL4064326ArchivedOct 1, 2024through Dec 31, 2024
Revised Total Coliform RuleFL4064326ArchivedSep 1, 2024through Sep 30, 2024
Total Haloacetic Acids (HAA5)FL4064326ArchivedJul 1, 2024through Sep 30, 2024
TTHMFL4064326ArchivedJul 1, 2024through Sep 30, 2024
TTHMFL4064326ArchivedApr 1, 2024through Jun 30, 2024
Total Haloacetic Acids (HAA5)FL4064326ArchivedApr 1, 2024through Jun 30, 2024
NitrateFL4064326ArchivedJan 1, 2024through Dec 31, 2024
Revised Total Coliform RuleFL4064326ResolvedNov 1, 2023through Nov 30, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Fort Lauderdale ZIP 33312 using 280 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

280 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Fort Lauderdale

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Fort Lauderdale reports →

Frequently asked

Water questions for Fort Lauderdale

Is tap water safe in Fort Lauderdale?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 280 PPM, or 16.4 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 280 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.