Skip to content

Local water dashboard

Official source aggregation

Water quality in Marco Island, FL 34145

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Collier County.

No active health-based violation reported
Primary matched system
Marco Island Utilities (city Of)
Source water
Surface water
County
Collier County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

313 PPM · 18.3 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0047 mg/L

31% of action level

Utility match

2 systems

Serves 31,830 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

313 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

313

mg/L as CaCO₃ equivalent

Grains per gallon

18.3

1 GPG ≈ 17.1 PPM

What this means at home

At 313 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

39

Nearest site

13.7 mi

Observation range

Apr 1, 2019–Jan 28, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: FL5110230 Port of the Is SA Well 3 AAO4486 (Well).USGS source documentation ↗

Regional context

Is 34145 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Marco Island median

313 PPM

About the same

2 indexed ZIP readings · Range 313–313 PPM

Florida median

280 PPM

33 PPM higher

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0047 mg/L

Reported Dec 1, 2024

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0047

EPA limit 0.015

Local level is 31% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
15
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Consumer Confidence RuleFL5110118UnaddressedJul 1, 2025
Revised Total Coliform RuleFL5110118ResolvedDec 1, 2024through Dec 31, 2024
Revised Total Coliform RuleFL5110118ResolvedOct 1, 2024through Oct 31, 2024
Revised Total Coliform RuleFL5110118ResolvedSep 1, 2024through Sep 30, 2024
Consumer Confidence RuleFL5110183ResolvedJul 1, 2024through Mar 14, 2025
Revised Total Coliform RuleFL5110183ResolvedJun 1, 2024through Jun 30, 2024
Revised Total Coliform RuleFL5110118ResolvedJun 1, 2024through Jun 30, 2024
TTHMFL5110183ResolvedApr 1, 2024through Jun 30, 2024
Total Haloacetic Acids (HAA5)FL5110183ResolvedApr 1, 2024through Jun 30, 2024
Total Haloacetic Acids (HAA5)FL5110183ResolvedOct 1, 2023through Dec 31, 2023
TTHMFL5110183ResolvedOct 1, 2023through Dec 31, 2023
TTHMFL5110118ResolvedOct 1, 2023through Dec 31, 2023
Total Haloacetic Acids (HAA5)FL5110118ResolvedOct 1, 2023through Dec 31, 2023
TTHMFL5110183ResolvedJul 1, 2022through Sep 30, 2022
Lead and Copper RuleFL5110183ResolvedJan 1, 2021through Aug 9, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Marco Island ZIP 34145 using 313 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

313 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Marco Island

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Marco Island reports →

Frequently asked

Water questions for Marco Island

Is tap water safe in Marco Island?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 313 PPM, or 18.3 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 313 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.