Skip to content

Local water dashboard

Official source aggregation

Water quality in Micco, FL 32976

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Brevard County.

1 active health-based violation
Primary matched system
San Sebastian Woods
Source water
Groundwater
County
Brevard County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

353 PPM · 20.6 GPG

Compliance screen

Review needed

1 active health-based record

Lead 90th percentile

0 mg/L

0% of action level

Utility match

5 systems

Serves 524 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

353 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

353

mg/L as CaCO₃ equivalent

Grains per gallon

20.6

1 GPG ≈ 17.1 PPM

What this means at home

At 353 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

79

Nearest site

5.4 mi

Observation range

May 9, 2016–May 27, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: FELLSMERE SA WELL 1 AAF9007 (Well).USGS source documentation ↗

Regional context

Is 32976 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Micco median

353 PPM

About the same

1 indexed ZIP readings · Range 353–353 PPM

Florida median

280 PPM

73 PPM higher

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 1, 2025

Copper (CU90)

2.3 mg/L

Reported Dec 1, 2011

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 2.3

EPA limit 1.3

Local level is 177% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
36
Health-based
1
Active health-based
1
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleFL3050596ArchivedMar 1, 2026through Mar 31, 2026
E. COLIFL3050596ArchivedMar 1, 2026through Mar 31, 2026
E. COLIFL3051086ArchivedSep 1, 2025through Sep 30, 2025
E. COLIFL3050108ArchivedApr 1, 2025through Apr 30, 2025
Revised Total Coliform RuleFL3050108ArchivedApr 1, 2025through Apr 30, 2025
E. COLIFL3051086ArchivedMar 1, 2025through Mar 31, 2025
LEAD AND COPPER RULE REVISIONSFL3050596UnaddressedFeb 1, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedFL3050596UnaddressedFeb 1, 2025
E. COLIFL3054017UnaddressedOct 1, 2024
Revised Total Coliform RuleFL3054017ResolvedJul 1, 2024through Jul 31, 2024
E. COLIFL3054017ResolvedJul 1, 2024through Jul 31, 2024
NitrateFL3054017ArchivedJan 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)FL3054017ArchivedJan 1, 2024through Dec 31, 2024
NitrateFL3050596ResolvedJan 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)FL3054017ArchivedJan 1, 2023through Dec 31, 2023
NitrateFL3054017ResolvedJan 1, 2023through Dec 31, 2023
E. COLIFL3054017ResolvedNov 1, 2022through Nov 30, 2022
Revised Total Coliform RuleFL3054017ResolvedNov 1, 2022through Nov 30, 2022
E. COLIFL3054017ResolvedAug 1, 2022through Aug 31, 2022
Revised Total Coliform RuleFL3054017ResolvedAug 1, 2022through Aug 31, 2022

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Micco ZIP 32976 using 353 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

353 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), LEAD AND COPPER RULE REVISIONS have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Micco

Is tap water safe in Micco?+

EPA ECHO reports 1 active health-based violation among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.

How hard is the water?+

Nearby USGS observations produce an estimate of 353 PPM, or 20.6 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 353 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.