Skip to content

Local water dashboard

Official source aggregation

Water quality in Panacea, FL 32346

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wakulla County.

No active health-based violation reported
Primary matched system
Panacea Area Water System
Source water
Groundwater
County
Wakulla County
Profile updated

At a glance

What the current records say

Hardness

Hard

155 PPM · 9.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0055 mg/L

37% of action level

Utility match

2 systems

Serves 3,020 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

155 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

155

mg/L as CaCO₃ equivalent

Grains per gallon

9.1

1 GPG ≈ 17.1 PPM

What this means at home

At 155 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

9

Nearest site

9 mi

Observation range

Sep 17, 2025–Mar 25, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: WAKULLA WELL NO. 2 AAA7843 (Well).USGS source documentation ↗

Regional context

Is 32346 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Panacea median

155 PPM

About the same

1 indexed ZIP readings · Range 155–155 PPM

Florida median

280 PPM

125 PPM lower

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0055 mg/L

Reported Dec 1, 2024

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0055

EPA limit 0.015

Local level is 37% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleFL1650514UnaddressedJan 1, 2022
Revised Total Coliform RuleHealth-basedFL1650514ResolvedApr 1, 2021through Apr 20, 2021
Lead and Copper RuleFL1650514UnaddressedJan 1, 2019
Lead and Copper RuleFL1650514UnaddressedJan 1, 2008
Lead and Copper RuleFL1650514UnaddressedJan 1, 2006

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Panacea ZIP 32346 using 155 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

155 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Panacea

Is tap water safe in Panacea?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 155 PPM, or 9.1 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 155 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.