Skip to content

Local water dashboard

Official source aggregation

Water quality in Port St. Lucie, FL 34983

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for St. Lucie County.

No active health-based violation reported
Primary matched system
St. Lucie West Services District
Source water
Groundwater
County
St. Lucie County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

301.5 PPM · 17.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.001 mg/L

7% of action level

Utility match

1 system

Serves 21,400 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

301.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

301.5

mg/L as CaCO₃ equivalent

Grains per gallon

17.6

1 GPG ≈ 17.1 PPM

What this means at home

At 301.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

56

Nearest site

0.4 mi

Observation range

Jun 20, 2016–Jan 27, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Port St Lucie SA Well 9 AAH7928 (Well).USGS source documentation ↗

Regional context

Is 34983 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Port St. Lucie median

302 PPM

About the same

7 indexed ZIP readings · Range 297–341 PPM

Florida median

280 PPM

22 PPM higher

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.001 mg/L

Reported Dec 1, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.001

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
29
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleFL4565031ArchivedDec 1, 2025through Dec 31, 2025
E. COLIFL4565031ArchivedDec 1, 2025through Dec 31, 2025
E. COLIFL4565031ArchivedSep 1, 2025through Sep 30, 2025
E. COLIFL4565031ResolvedJul 1, 2025through Jul 31, 2025
Consumer Confidence RuleFL4565031UnaddressedJul 1, 2025
Revised Total Coliform RuleFL4565031ResolvedJul 1, 2025through Jul 31, 2025
E. COLIFL4565031ResolvedApr 1, 2025through Apr 30, 2025
E. COLIFL4565031ResolvedJan 1, 2025through Jan 31, 2025
Revised Total Coliform RuleFL4565031ResolvedJan 1, 2025through Jan 31, 2025
Revised Total Coliform RuleFL4565031ResolvedDec 1, 2024through Dec 31, 2024
E. COLIFL4565031ResolvedDec 1, 2024through Dec 31, 2024
E. COLIFL4565031ResolvedNov 1, 2024through Nov 30, 2024
Revised Total Coliform RuleFL4565031ResolvedNov 1, 2024through Nov 30, 2024
Revised Total Coliform RuleFL4565031ResolvedOct 1, 2024through Oct 31, 2024
E. COLIFL4565031ResolvedOct 1, 2024through Oct 31, 2024
E. COLIFL4565031ResolvedSep 1, 2024through Sep 30, 2024
Revised Total Coliform RuleFL4565031ResolvedSep 1, 2024through Sep 30, 2024
Revised Total Coliform RuleFL4565031ResolvedJul 1, 2024through Jul 31, 2024
E. COLIFL4565031ResolvedJul 1, 2024through Jul 31, 2024
E. COLIFL4565031ResolvedJun 1, 2024through Jun 30, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Port St. Lucie ZIP 34983 using 301.5 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

301.5 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Port St. Lucie

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Port St. Lucie reports →

Frequently asked

Water questions for Port St. Lucie

Is tap water safe in Port St. Lucie?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 301.5 PPM, or 17.6 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 301.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.