Skip to content

Local water dashboard

Official source aggregation

Water quality in Sopchoppy, FL 32358

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wakulla County.

1 reported benchmark flag
Primary matched system
City Of Sopchoppy
Source water
Groundwater
County
Wakulla County
Profile updated

At a glance

What the current records say

Hardness

Hard

160 PPM · 9.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0023 mg/L

15% of action level

Utility match

1 system

Serves 12,998 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

160 PPM

Soft
0–59Moderate
60–120Hard
121–180Very hard
181+

Parts per million

160

mg/L as CaCO₃ equivalent

Grains per gallon

9.4

1 GPG ≈ 17.1 PPM

What this means at home

At 160 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

15

Nearest site

12.8 mi

Observation range

Sep 11, 2023–Mar 25, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: WAKULLA WELL NO. 2 AAA7843 (Well).USGS source documentation ↗

Regional context

Is 32358 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Sopchoppy median

160 PPM

About the same

1 indexed ZIP readings · Range 160–160 PPM

Florida median

280 PPM

120 PPM lower

602 indexed ZIP readings · Range 20–374.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.0023 mg/L

Reported Dec 1, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0023

EPA limit 0.015

Local level is 15% of the listed EPA limit.

Total Haloacetic Acids (HAA5)

Measured in UG/L

Fail

Local 61.76

EPA limit 0.06

Local level is 102933% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Total Haloacetic Acids (HAA5)Health-basedReported 61.76 UG/L · MCL 0.06FL1650612ArchivedApr 1, 2024through Jun 30, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Sopchoppy ZIP 32358 using 160 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

160 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Total Haloacetic Acids (HAA5) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Sopchoppy

Is tap water safe in Sopchoppy?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 160 PPM, or 9.4 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 160 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.