Hardness
Soft
59.7 PPM · 3.5 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Brevard County.
At a glance
EPA quarter 2026Q2
Hardness
Soft
59.7 PPM · 3.5 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0011 mg/L
7% of action level
Utility match
1 system
Serves 30,443 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
59.7 PPM
Parts per million
59.7
mg/L as CaCO₃ equivalent
Grains per gallon
3.5
1 GPG ≈ 17.1 PPM
What this means at home
At 59.7 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
6
Nearest site
20.4 mi
Observation range
Sep 22, 2016–Aug 12, 2025
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: BLUE CYPRESS CREEK AT MOUTH NR FELLSMERE, FLA. (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
West Melbourne median
60 PPM
About the same1 indexed ZIP readings · Range 59.7–59.7 PPM
Florida median
280 PPM
220 PPM lower602 indexed ZIP readings · Range 20–374.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0011 mg/L
Reported Dec 1, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0011
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | FL3051460 | Archived | Sep 1, 2025through Sep 30, 2025 |
| Consumer Confidence Rule | FL3051460 | Resolved | Jul 1, 2025through Oct 27, 2025 |
| Total Haloacetic Acids (HAA5) | FL3051460 | Resolved | Apr 1, 2023through Jun 30, 2023 |
| TTHM | FL3051460 | Resolved | Apr 1, 2023through Jun 30, 2023 |
| TTHM | FL3051460 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| Total Haloacetic Acids (HAA5) | FL3051460 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| Revised Total Coliform Rule | FL3051460 | Resolved | Nov 1, 2022through Jan 27, 2023 |
| Total Haloacetic Acids (HAA5) | FL3051460 | Archived | Jul 1, 2022through Sep 30, 2022 |
| TTHM | FL3051460 | Archived | Jul 1, 2022through Sep 30, 2022 |
| Lead and Copper Rule | FL3051460 | Resolved | Jan 1, 2021through Jan 3, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to West Melbourne ZIP 32904 using 59.7 PPM nearby hardness and 1 reported measurement benchmarks.
No urgent match
This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.
Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 59.7 PPM, or 3.5 grains per gallon, classified as soft. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.