Skip to content

Local water dashboard

Official source aggregation

Water quality in Clayton, GA 30525

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Rabun County.

No active health-based violation reported
Primary matched system
Rabun County Water & Sewer Authority
Source water
Surface water
County
Rabun County
Profile updated

At a glance

What the current records say

Hardness

Soft

12.5 PPM · 0.7 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0016 mg/L

11% of action level

Utility match

2 systems

Serves 10,276 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

12.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

12.5

mg/L as CaCO₃ equivalent

Grains per gallon

0.7

1 GPG ≈ 17.1 PPM

What this means at home

At 12.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

10

Nearest site

7.4 mi

Observation range

Jan 6, 2016–Mar 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: CHATTOOGA RIVER NEAR CLAYTON, GA (Stream).USGS source documentation ↗

Regional context

Is 30525 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Clayton median

13 PPM

About the same

1 indexed ZIP readings · Range 12.5–12.5 PPM

Georgia median

40 PPM

27 PPM lower

469 indexed ZIP readings · Range 3–207 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0016 mg/L

Reported Dec 31, 2026

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0016

EPA limit 0.015

Local level is 11% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Total Haloacetic Acids (HAA5)GA2410118ResolvedJan 1, 2024through Mar 31, 2024
TTHMGA2410118ResolvedJan 1, 2024through Mar 31, 2024
Revised Total Coliform RuleGA2410118ResolvedAug 1, 2022through Aug 31, 2022
Public NoticeGA2410006UnaddressedJan 21, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Clayton ZIP 30525 using 12.5 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Clayton

Is tap water safe in Clayton?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 12.5 PPM, or 0.7 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.