Skip to content

Local water dashboard

Official source aggregation

Water quality in Dublin, GA 31021

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Laurens County.

No active health-based violation reported
Primary matched system
Dublin
Source water
Surface water + Groundwater
County
Laurens County
Profile updated

At a glance

What the current records say

Hardness

Soft

32 PPM · 1.9 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0097 mg/L

65% of action level

Utility match

7 systems

Serves 15,392 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

32 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

32

mg/L as CaCO₃ equivalent

Grains per gallon

1.9

1 GPG ≈ 17.1 PPM

What this means at home

At 32 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

5

Nearest site

4.5 mi

Observation range

Jan 11, 2016–Dec 11, 2024

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: OCONEE RIVER AT I-16, NEAR DUBLIN, GA (Stream).USGS source documentation ↗

Regional context

Is 31021 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Dublin median

32 PPM

About the same

1 indexed ZIP readings · Range 32–32 PPM

Georgia median

40 PPM

8 PPM lower

469 indexed ZIP readings · Range 3–207 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0097 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0097

EPA limit 0.015

Local level is 65% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
62
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Consumer Confidence RuleGA1750043UnaddressedOct 1, 2025
Lead and Copper RuleGA1750017UnaddressedOct 1, 2025
Consumer Confidence RuleGA1750104ResolvedJul 1, 2025through Jul 28, 2025
LEAD AND COPPER RULE REVISIONSGA1750130ResolvedOct 17, 2024through Dec 23, 2025
LEAD AND COPPER RULE REVISIONSGA1750043UnaddressedOct 17, 2024
LEAD AND COPPER RULE REVISIONSGA1750017ResolvedOct 17, 2024through Jan 6, 2026
Consumer Confidence RuleGA1750130UnaddressedOct 1, 2023
Consumer Confidence RuleGA1750130UnaddressedJul 1, 2023
Public NoticeGA1750043UnaddressedJan 27, 2023
Public NoticeGA1750017UnaddressedJan 26, 2023
ChromiumGA1750030ArchivedJan 1, 2023through Dec 31, 2025
Beryllium, TotalGA1750030ArchivedJan 1, 2023through Dec 31, 2025
ChromiumGA1750030ArchivedJan 1, 2023through Dec 31, 2025
CadmiumGA1750030ArchivedJan 1, 2023through Dec 31, 2025
ArsenicGA1750030ArchivedJan 1, 2023through Dec 31, 2025
Beryllium, TotalGA1750030ArchivedJan 1, 2023through Dec 31, 2025
CadmiumGA1750030ArchivedJan 1, 2023through Dec 31, 2025
Thallium, TotalGA1750030ArchivedJan 1, 2023through Dec 31, 2025
FluorideGA1750030ArchivedJan 1, 2023through Dec 31, 2025
FluorideGA1750030ArchivedJan 1, 2023through Dec 31, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Dublin ZIP 31021 using 32 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Dublin

Is tap water safe in Dublin?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 32 PPM, or 1.9 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.