Skip to content

Local water dashboard

Official source aggregation

Water quality in Forsyth, GA 31029

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Monroe County.

No active health-based violation reported
Primary matched system
Forsyth
Source water
Surface water + Groundwater
County
Monroe County
Profile updated

At a glance

What the current records say

Hardness

Soft

31.2 PPM · 1.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

2 systems

Serves 8,585 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

31.2 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

31.2

mg/L as CaCO₃ equivalent

Grains per gallon

1.8

1 GPG ≈ 17.1 PPM

What this means at home

At 31.2 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

20

Nearest site

18.6 mi

Observation range

Jan 5, 2016–Jun 3, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: OCMULGEE RIVER NEAR MACON, GA (Stream).USGS source documentation ↗

Regional context

Is 31029 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Forsyth median

31 PPM

About the same

1 indexed ZIP readings · Range 31.2–31.2 PPM

Georgia median

40 PPM

9 PPM lower

469 indexed ZIP readings · Range 3–207 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSGA2070012ResolvedOct 17, 2024through May 8, 2025
Consumer Confidence RuleGA2070012UnaddressedJul 1, 2023
Public NoticeGA2070001ResolvedMay 21, 2021through Feb 21, 2022
Lead and Copper RuleGA2070012UnaddressedJan 1, 1994

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Forsyth ZIP 31029 using 31.2 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Forsyth

Is tap water safe in Forsyth?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 31.2 PPM, or 1.8 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.