Hardness
Soft
30.3 PPM · 1.8 GPG
Local water dashboard
Official source aggregationWater quality in Shady Dale, GA 31085
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Jasper County.
1 reported benchmark flag
- Primary matched system
- Shady Dale
- Source water
- Groundwater
- County
- Jasper County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0031 mg/L
21% of action level
Utility match
1 system
Serves 454 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
30.3 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
30.3
mg/L as CaCO₃ equivalent
Grains per gallon
1.8
1 GPG ≈ 17.1 PPM
What this means at home
At 30.3 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
19
Nearest site
11.7 mi
Observation range
Jan 5, 2016–Jun 3, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: ALCOVY R NEWTON FACTORY BRDG RD NR STEWART, GA (Stream).USGS source documentation ↗
Regional context
Is 31085 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Shady Dale median
30 PPM
About the same1 indexed ZIP readings · Range 30.3–30.3 PPM
Georgia median
40 PPM
10 PPM lower469 indexed ZIP readings · Range 3–207 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.0031 mg/L
Reported Dec 31, 2024
Copper (CU90)
1.6 mg/L
Reported Dec 31, 2006
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0031
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 1.6
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 19
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | GA1590001 | Unaddressed | Jul 2, 2025 |
| Consumer Confidence Rule | GA1590001 | Unaddressed | Oct 1, 2024 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Aug 1, 2024through Aug 31, 2024 |
| Consumer Confidence Rule | GA1590001 | Unaddressed | Jul 1, 2024 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Jun 1, 2024through Jun 30, 2024 |
| Revised Total Coliform Rule | GA1590001 | Resolved | May 1, 2024through May 31, 2024 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Apr 1, 2024through Apr 30, 2024 |
| Consumer Confidence Rule | GA1590001 | Unaddressed | Oct 1, 2023 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Oct 1, 2023through Oct 31, 2023 |
| Consumer Confidence Rule | GA1590001 | Unaddressed | Jul 1, 2023 |
| Consumer Confidence Rule | GA1590001 | Resolved | Oct 1, 2022through Dec 7, 2022 |
| Public Notice | GA1590001 | Resolved | Sep 2, 2022through Mar 24, 2023 |
| Public Notice | GA1590001 | Resolved | Jul 21, 2022through Oct 1, 2022 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Jul 1, 2022through Jul 31, 2022 |
| Consumer Confidence Rule | GA1590001 | Resolved | Jul 1, 2022through Dec 7, 2022 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Aug 1, 2021through Aug 31, 2021 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Jul 1, 2021through Jul 31, 2021 |
| Consumer Confidence Rule | GA1590001 | Resolved | Jul 1, 2021through Jul 22, 2021 |
| Revised Total Coliform Rule | GA1590001 | Resolved | Feb 1, 2021through Feb 28, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Shady Dale ZIP 31085 using 30.3 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Shady Dale
Is tap water safe in Shady Dale?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 30.3 PPM, or 1.8 grains per gallon, classified as soft. This is not a household tap measurement.
Do I need a water softener?+
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.