Hardness
Hard
123 PPM · 7.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Houston County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
123 PPM · 7.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0015 mg/L
10% of action level
Utility match
2 systems
Serves 83,705 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
123 PPM
Parts per million
123
mg/L as CaCO₃ equivalent
Grains per gallon
7.2
1 GPG ≈ 17.1 PPM
What this means at home
At 123 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
15
Nearest site
28.6 mi
Observation range
Sep 18, 2023–Dec 16, 2025
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 12V005 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Warner Robins median
123 PPM
About the same3 indexed ZIP readings · Range 123–123 PPM
Georgia median
40 PPM
83 PPM higher469 indexed ZIP readings · Range 3–207 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0015 mg/L
Reported Dec 31, 2025
Copper (CU90)
1.53 mg/L
Reported Dec 31, 2013
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0015
EPA limit 0.015
Measured in mg/L
Local 1.53
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | GA1530042 | Archived | Mar 1, 2026through Mar 31, 2026 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Warner Robins ZIP 31093 using 123 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
123 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 123 PPM, or 7.2 grains per gallon, classified as hard. This is not a household tap measurement.
At 123 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.