Skip to content

Local water dashboard

Official source aggregation

Water quality in Albion, IA 50005

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Marshall County.

No active health-based violation reported
Primary matched system
Albion Water Department
Source water
Groundwater
County
Marshall County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

270.5 PPM · 15.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0014 mg/L

9% of action level

Utility match

1 system

Serves 448 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

270.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

270.5

mg/L as CaCO₃ equivalent

Grains per gallon

15.8

1 GPG ≈ 17.1 PPM

What this means at home

At 270.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

56

Nearest site

12.2 mi

Observation range

Feb 9, 2016–Mar 3, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 083N17W05DCDD 1997NAWQA Marshall Co IADRN-5 (Well).USGS source documentation ↗

Regional context

Is 50005 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Albion median

271 PPM

About the same

1 indexed ZIP readings · Range 270.5–270.5 PPM

Iowa median

281 PPM

10 PPM lower

721 indexed ZIP readings · Range 182–834 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0014 mg/L

Reported Dec 31, 2024

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0014

EPA limit 0.015

Local level is 9% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
3
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleIA6403011ArchivedFeb 1, 2026through Feb 28, 2026
Revised Total Coliform RuleIA6403011ResolvedDec 1, 2025through Dec 31, 2025
Revised Total Coliform RuleIA6403011ResolvedNov 1, 2025through Nov 30, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Albion ZIP 50005 using 270.5 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

270.5 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Albion

Is tap water safe in Albion?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 270.5 PPM, or 15.8 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 270.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.