Hardness
Very Hard
263 PPM · 15.4 GPG
Local water dashboard
Official source aggregationWater quality in Atkins, IA 52206
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Benton County.
1 reported benchmark flag
- Primary matched system
- Atkins Municipal Water Works
- Source water
- Groundwater
- County
- Benton County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.002 mg/L
13% of action level
Utility match
1 system
Serves 2,056 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
263 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
263
mg/L as CaCO₃ equivalent
Grains per gallon
15.4
1 GPG ≈ 17.1 PPM
What this means at home
At 263 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
67
Nearest site
7.4 mi
Observation range
Feb 9, 2016–Mar 3, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 083N08W11DCBC 2013Cedar Rapids Ranney 6 (Well).USGS source documentation ↗
Regional context
Is 52206 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Atkins median
263 PPM
About the same1 indexed ZIP readings · Range 263–263 PPM
Iowa median
281 PPM
18 PPM lower721 indexed ZIP readings · Range 182–834 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.002 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.002
EPA limit 0.015
TTHM
Measured in MG/L
Local 0.088
EPA limit 0.08
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 3
- Health-based
- 3
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| TTHMHealth-basedReported 0.088 MG/L · MCL 0.08 | IA0603072 | Resolved | Jul 1, 2021through Sep 30, 2021 |
| TTHMHealth-basedReported 0.112 MG/L · MCL 0.08 | IA0603072 | Resolved | Apr 1, 2021through Jun 30, 2021 |
| TTHMHealth-basedReported 0.11 MG/L · MCL 0.08 | IA0603072 | Resolved | Jan 1, 2021through Mar 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Atkins ZIP 52206 using 263 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
263 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Atkins
Is tap water safe in Atkins?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 263 PPM, or 15.4 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 263 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.