Hardness
Very Hard
456.5 PPM · 26.7 GPG
Local water dashboard
Official source aggregationWater quality in Bronson, IA 51007
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Woodbury County.
1 reported benchmark flag
- Primary matched system
- Bronson Water Supply
- Source water
- Groundwater
- County
- Woodbury County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0019 mg/L
13% of action level
Utility match
1 system
Serves 294 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
456.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
456.5
mg/L as CaCO₃ equivalent
Grains per gallon
26.7
1 GPG ≈ 17.1 PPM
What this means at home
At 456.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
82
Nearest site
15 mi
Observation range
Aug 9, 2016–May 27, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 27N 8E 1ACCC2 (M-H2) (Well).USGS source documentation ↗
Regional context
Is 51007 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Bronson median
457 PPM
About the same1 indexed ZIP readings · Range 456.5–456.5 PPM
Iowa median
281 PPM
176 PPM higher721 indexed ZIP readings · Range 182–834 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.0019 mg/L
Reported Dec 31, 2025
Copper (CU90)
2 mg/L
Reported Dec 31, 2002
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0019
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 2
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 0
- Health-based
- 0
- Active health-based
- 0
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Bronson ZIP 51007 using 456.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
456.5 PPM is 4× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Bronson
Is tap water safe in Bronson?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 456.5 PPM, or 26.7 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 456.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.