Hardness
Very Hard
232.5 PPM · 13.6 GPG
Local water dashboard
Official source aggregationWater quality in Aberdeen, ID 83210
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Bingham County.
No active health-based violation reported
- Primary matched system
- Aberdeen City Of
- Source water
- Groundwater
- County
- Bingham County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.002 mg/L
13% of action level
Utility match
1 system
Serves 2,088 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
232.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
232.5
mg/L as CaCO₃ equivalent
Grains per gallon
13.6
1 GPG ≈ 17.1 PPM
What this means at home
At 232.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
80
Nearest site
21.4 mi
Observation range
May 16, 2016–Jun 18, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 01N 30E 19DCA1 SEP-16 (Well).USGS source documentation ↗
Regional context
Is 83210 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Aberdeen median
233 PPM
About the same1 indexed ZIP readings · Range 232.5–232.5 PPM
Idaho median
168 PPM
65 PPM higher78 indexed ZIP readings · Range 22.2–339 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.002 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.002
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 0
- Health-based
- 0
- Active health-based
- 0
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Aberdeen ZIP 83210 using 232.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
232.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Aberdeen
Is tap water safe in Aberdeen?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 232.5 PPM, or 13.6 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 232.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.