Hardness
Very Hard
217 PPM · 12.7 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Blaine County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
217 PPM · 12.7 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.002 mg/L
13% of action level
Utility match
1 system
Serves 8,000 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
217 PPM
Parts per million
217
mg/L as CaCO₃ equivalent
Grains per gallon
12.7
1 GPG ≈ 17.1 PPM
What this means at home
At 217 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
121
Nearest site
51.2 mi
Observation range
May 16, 2016–Jun 18, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 06S 17E 31DDC2 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Hailey median
217 PPM
About the same1 indexed ZIP readings · Range 217–217 PPM
Idaho median
168 PPM
49 PPM higher78 indexed ZIP readings · Range 22.2–339 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.002 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.002
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | ID5070022 | Resolved | Jul 2, 2025through Dec 19, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Hailey ZIP 83333 using 217 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
217 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 217 PPM, or 12.7 grains per gallon, classified as very hard. This is not a household tap measurement.
At 217 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.