Skip to content

Local water dashboard

Official source aggregation

Water quality in Findlay, IL 62534

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Shelby County.

1 active health-based violation
Primary matched system
Findlay
Source water
Surface water
County
Shelby County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

315 PPM · 18.4 GPG

Compliance screen

Review needed

1 active health-based record

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 750 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

315 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

315

mg/L as CaCO₃ equivalent

Grains per gallon

18.4

1 GPG ≈ 17.1 PPM

What this means at home

At 315 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

27

Nearest site

29.6 mi

Observation range

May 1, 2018–Aug 22, 2023

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 17N 5E-24.2h1 (Well).USGS source documentation ↗

Regional context

Is 62534 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Findlay median

315 PPM

About the same

1 indexed ZIP readings · Range 315–315 PPM

Illinois median

285 PPM

30 PPM higher

1065 indexed ZIP readings · Range 115–408 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

1.96 mg/L

Reported Sep 30, 1993

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.96

EPA limit 1.3

Local level is 151% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
7
Health-based
1
Active health-based
1
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSIL1730100UnaddressedJul 2, 2025
Consumer Confidence RuleIL1730100ResolvedJul 1, 2025through Jul 15, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedIL1730100UnaddressedOct 17, 2024
Lead and Copper RuleIL1730100ResolvedOct 1, 2023through Oct 4, 2021
Revised Total Coliform RuleIL1730100ResolvedJun 1, 2022through Jun 30, 2022
ChlorineIL1730100ResolvedApr 1, 2022through Jun 30, 2022
Public NoticeIL1730100ResolvedOct 15, 2021through Nov 18, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Findlay ZIP 62534 using 315 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

315 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), LEAD AND COPPER RULE REVISIONS have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Findlay

Is tap water safe in Findlay?+

EPA ECHO reports 1 active health-based violation among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.

How hard is the water?+

Nearby USGS observations produce an estimate of 315 PPM, or 18.4 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 315 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.