Skip to content

Local water dashboard

Official source aggregation

Water quality in Olympia Fields, IL 60461

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Cook County.

No active health-based violation reported
Primary matched system
Olympia Fields
Source water
Surface water
County
Cook County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

280 PPM · 16.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0042 mg/L

28% of action level

Utility match

1 system

Serves 4,922 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

280 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

280

mg/L as CaCO₃ equivalent

Grains per gallon

16.4

1 GPG ≈ 17.1 PPM

What this means at home

At 280 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

16

Nearest site

12.7 mi

Observation range

Apr 26, 2016–May 13, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: BIG MARSH AT SOUTH DEERING, IL (Stream).USGS source documentation ↗

Regional context

Is 60461 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Olympia Fields median

280 PPM

About the same

1 indexed ZIP readings · Range 280–280 PPM

Illinois median

285 PPM

5 PPM lower

1065 indexed ZIP readings · Range 115–408 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0042 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0042

EPA limit 0.015

Local level is 28% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
7
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleIL0312280UnaddressedJan 1, 2026
LEAD AND COPPER RULE REVISIONSIL0312280UnaddressedJul 2, 2025
Consumer Confidence RuleIL0312280ResolvedJul 1, 2025through Sep 26, 2025
Consumer Confidence RuleIL0312280ResolvedJul 1, 2023through Jul 3, 2024
Public NoticeIL0312280ResolvedJan 12, 2022through Mar 3, 2022
Lead and Copper RuleIL0312280ResolvedOct 1, 2021through Feb 27, 2024
Consumer Confidence RuleIL0312280ResolvedJul 1, 2021through Nov 12, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Olympia Fields ZIP 60461 using 280 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

280 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Olympia Fields

Is tap water safe in Olympia Fields?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 280 PPM, or 16.4 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 280 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.