Skip to content

Local water dashboard

Official source aggregation

Water quality in Pinckneyville, IL 62274

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Perry County.

1 reported benchmark flag
Primary matched system
Pinckneyville
Source water
Surface water + Groundwater
County
Perry County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

260.5 PPM · 15.2 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

2 systems

Serves 5,804 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

260.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

260.5

mg/L as CaCO₃ equivalent

Grains per gallon

15.2

1 GPG ≈ 17.1 PPM

What this means at home

At 260.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

16

Nearest site

37.8 mi

Observation range

Jan 5, 2016–May 19, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: South Fork Saline Creek near Perryville, MO (Stream).USGS source documentation ↗

Regional context

Is 62274 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Pinckneyville median

261 PPM

About the same

1 indexed ZIP readings · Range 260.5–260.5 PPM

Illinois median

285 PPM

24 PPM lower

1065 indexed ZIP readings · Range 115–408 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

TTHM

Measured in MG/L

Fail

Local 0.081

EPA limit 0.08

Local level is 101% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
15
Health-based
4
Active health-based
0
Contaminant or ruleSystemStatusPeriod
AtrazineIL1450150ResolvedJul 1, 2025through Sep 30, 2025
Public NoticeIL1450150ResolvedJun 28, 2025through Jul 1, 2025
Interim Enhanced Surface Water Treatment RuleHealth-basedIL1450150ResolvedJun 1, 2025through Jun 30, 2025
Public NoticeIL1450150ResolvedMay 17, 2025through Jun 11, 2025
TTHMHealth-basedReported 0.081 MG/L · MCL 0.08IL1450150ResolvedJan 1, 2025through Mar 31, 2025
TTHMIL1450150ResolvedOct 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)IL1450150ResolvedOct 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)IL1450150ResolvedOct 1, 2024through Dec 31, 2024
TTHMIL1450150ResolvedOct 1, 2024through Dec 31, 2024
Interim Enhanced Surface Water Treatment RuleHealth-basedIL1450150ResolvedJul 1, 2024through Jul 31, 2024
TTHMIL1450150ResolvedJul 1, 2024through Sep 30, 2024
Total Haloacetic Acids (HAA5)IL1450150ResolvedJul 1, 2024through Sep 30, 2024
TTHMIL1450150ResolvedJul 1, 2024through Sep 30, 2024
Total Haloacetic Acids (HAA5)IL1450150ResolvedJul 1, 2024through Sep 30, 2024
Interim Enhanced Surface Water Treatment RuleHealth-basedIL1450150ResolvedJun 1, 2024through Jun 30, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Pinckneyville ZIP 62274 using 260.5 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

260.5 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Pinckneyville

Is tap water safe in Pinckneyville?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 260.5 PPM, or 15.2 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 260.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.