Skip to content

Local water dashboard

Official source aggregation

Water quality in Staunton, IL 62088

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Macoupin County.

No active health-based violation reported
Primary matched system
Staunton
Source water
Surface water
County
Macoupin County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

257 PPM · 15 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 5,756 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

257 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

257

mg/L as CaCO₃ equivalent

Grains per gallon

15

1 GPG ≈ 17.1 PPM

What this means at home

At 257 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

7

Nearest site

22.5 mi

Observation range

Jan 6, 2016–Jun 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Mississippi River Pool Lock and Dam 26 at Alton,IL (Stream).USGS source documentation ↗

Regional context

Is 62088 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Staunton median

257 PPM

About the same

1 indexed ZIP readings · Range 257–257 PPM

Illinois median

285 PPM

28 PPM lower

1065 indexed ZIP readings · Range 115–408 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
25
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
AtrazineIL1171050ArchivedJan 1, 2026through Mar 31, 2026
SimazineIL1171050ArchivedJan 1, 2026through Mar 31, 2026
CARBON, TOTALIL1171050ResolvedNov 1, 2025through Nov 30, 2025
CARBON, TOTALIL1171050ResolvedNov 1, 2025through Nov 30, 2025
Vinyl chlorideIL1171050ArchivedApr 1, 2025through Jun 30, 2025
1,2,4-TrichlorobenzeneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
Xylenes, TotalIL1171050ArchivedApr 1, 2025through Jun 30, 2025
DICHLOROMETHANEIL1171050ArchivedApr 1, 2025through Jun 30, 2025
1,1-DichloroethyleneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
1,2-DichloroethaneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
1,1,1-TrichloroethaneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
TrichloroethyleneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
1,1,2-TrichloroethaneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
CHLOROBENZENEIL1171050ArchivedApr 1, 2025through Jun 30, 2025
BenzeneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
EthylbenzeneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
StyreneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
o-DichlorobenzeneIL1171050ArchivedApr 1, 2025through Jun 30, 2025
Carbon tetrachlorideIL1171050ArchivedApr 1, 2025through Jun 30, 2025
cis-1,2-DichloroethyleneIL1171050ArchivedApr 1, 2025through Jun 30, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Staunton ZIP 62088 using 257 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

257 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Staunton

Is tap water safe in Staunton?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 257 PPM, or 15 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 257 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.