Skip to content

Local water dashboard

Official source aggregation

Water quality in Zeigler, IL 62999

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Franklin County.

No active health-based violation reported
Primary matched system
Zeigler
Source water
Surface water
County
Franklin County
Profile updated

At a glance

What the current records say

Hardness

Hard

164.5 PPM · 9.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.008 mg/L

53% of action level

Utility match

1 system

Serves 1,774 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

164.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

164.5

mg/L as CaCO₃ equivalent

Grains per gallon

9.6

1 GPG ≈ 17.1 PPM

What this means at home

At 164.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

6

Nearest site

47.7 mi

Observation range

Jan 4, 2016–May 28, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: OHIO RIVER AT OLMSTED, IL (Stream).USGS source documentation ↗

Regional context

Is 62999 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Zeigler median

165 PPM

About the same

1 indexed ZIP readings · Range 164.5–164.5 PPM

Illinois median

285 PPM

120 PPM lower

1065 indexed ZIP readings · Range 115–408 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.008 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.008

EPA limit 0.015

Local level is 53% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSIL0550750UnaddressedJul 2, 2025
Lead and Copper RuleIL0550750ResolvedOct 1, 2021through Aug 30, 2022
Revised Total Coliform RuleIL0550750ResolvedJul 1, 2021through Jul 31, 2021
ChloramineIL0550750ResolvedJul 1, 2021through Aug 23, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Zeigler ZIP 62999 using 164.5 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

164.5 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Zeigler

Is tap water safe in Zeigler?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 164.5 PPM, or 9.6 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 164.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.