Skip to content

Local water dashboard

Official source aggregation

Water quality in Cherryvale, KS 67335

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Montgomery County.

No active health-based violation reported
Primary matched system
Cherryvale, City Of
Source water
Surface water
County
Montgomery County
Profile updated

At a glance

What the current records say

Hardness

Hard

161 PPM · 9.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

3 systems

Serves 2,159 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

161 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

161

mg/L as CaCO₃ equivalent

Grains per gallon

9.4

1 GPG ≈ 17.1 PPM

What this means at home

At 161 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

7

Nearest site

51.5 mi

Observation range

Jan 26, 2016–Apr 20, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Center Creek near Smithfield, MO (Stream).USGS source documentation ↗

Regional context

Is 67335 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Cherryvale median

161 PPM

About the same

1 indexed ZIP readings · Range 161–161 PPM

Kansas median

289 PPM

128 PPM lower

540 indexed ZIP readings · Range 72.2–707 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
7
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleKS2012512UnaddressedOct 1, 2025
LEAD AND COPPER RULE REVISIONSKS2012512UnaddressedJul 2, 2025
ChlorineKS2012512ResolvedJun 1, 2025through Jun 30, 2025
Revised Total Coliform RuleKS2012512ResolvedJun 1, 2025through Jun 30, 2025
Lead and Copper RuleKS2012512ResolvedOct 31, 2022through Oct 3, 2022
Revised Total Coliform RuleKS2012512ResolvedDec 1, 2021through Dec 31, 2021
ChlorineKS2012512ResolvedOct 1, 2021through Dec 31, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Cherryvale ZIP 67335 using 161 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

161 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Cherryvale

Is tap water safe in Cherryvale?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 161 PPM, or 9.4 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 161 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.