Hardness
Moderately Hard
89.2 PPM · 5.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Greenwood County.
At a glance
EPA quarter 2026Q2
Hardness
Moderately Hard
89.2 PPM · 5.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0013 mg/L
9% of action level
Utility match
3 systems
Serves 2,289 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
89.2 PPM
Parts per million
89.2
mg/L as CaCO₃ equivalent
Grains per gallon
5.2
1 GPG ≈ 17.1 PPM
What this means at home
At 89.2 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
8
Nearest site
54.1 mi
Observation range
Jan 19, 2016–Jun 3, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: McConnell C at 47th St, Wichita, KS (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Eureka median
89 PPM
About the same1 indexed ZIP readings · Range 89.2–89.2 PPM
Kansas median
289 PPM
200 PPM lower540 indexed ZIP readings · Range 72.2–707 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0013 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0013
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | KS2007302 | Unaddressed | Jul 2, 2025 |
| Surface Water Treatment Rule | KS2007306 | Archived | Jul 1, 2025through Jul 31, 2025 |
| Revised Total Coliform Rule | KS2007302 | Resolved | Nov 1, 2024through Nov 30, 2024 |
| Chlorine | KS2007302 | Resolved | Nov 1, 2024through Nov 30, 2024 |
| LEAD AND COPPER RULE REVISIONS | KS2007306 | Resolved | Oct 17, 2024through Oct 17, 2024 |
| Revised Total Coliform Rule | KS2007302 | Resolved | Nov 1, 2022through Nov 30, 2022 |
| Lead and Copper Rule | KS2007305 | Resolved | Oct 31, 2022through Sep 1, 2022 |
| Chlorine | KS2007302 | Resolved | Oct 1, 2022through Dec 14, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Eureka ZIP 67045 using 89.2 PPM nearby hardness and 1 reported measurement benchmarks.
No urgent match
This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.
Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 89.2 PPM, or 5.2 grains per gallon, classified as moderately hard. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.