Hardness
Very Hard
203.5 PPM · 11.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Morris County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
203.5 PPM · 11.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0013 mg/L
9% of action level
Utility match
1 system
Serves 2,332 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
203.5 PPM
Parts per million
203.5
mg/L as CaCO₃ equivalent
Grains per gallon
11.9
1 GPG ≈ 17.1 PPM
What this means at home
At 203.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
14
Nearest site
19.5 mi
Observation range
Jan 11, 2016–Jun 9, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SMOKY HILL R AT ENTERPRISE, KS (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Herington median
204 PPM
About the same1 indexed ZIP readings · Range 203.5–203.5 PPM
Kansas median
289 PPM
85 PPM lower540 indexed ZIP readings · Range 72.2–707 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0013 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
3 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0013
EPA limit 0.015
Measured in MG/L
Local 0.029
EPA limit 0.01
Measured in MG/L
Local 0.082
EPA limit 0.08
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Bromate | KS2004102 | Archived | Feb 1, 2026through Feb 28, 2026 |
| BromateHealth-basedReported 0.029 MG/L · MCL 0.01 | KS2004102 | Archived | Jan 1, 2026through Mar 31, 2026 |
| LEAD AND COPPER RULE REVISIONS | KS2004102 | Unaddressed | Jul 2, 2025 |
| TTHMHealth-basedReported 0.082 MG/L · MCL 0.08 | KS2004102 | Resolved | Jul 1, 2024through Sep 30, 2024 |
| Chlorine | KS2004102 | Resolved | May 1, 2024through May 31, 2024 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Herington ZIP 67449 using 203.5 PPM nearby hardness and 3 reported measurement benchmarks.
Scale protection
203.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Bromate, TTHM have a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 203.5 PPM, or 11.9 grains per gallon, classified as very hard. This is not a household tap measurement.
At 203.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.