Hardness
Hard
166 PPM · 9.7 GPG
Local water dashboard
Official source aggregationWater quality in Salina, KS 67401
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Saline County.
1 reported benchmark flag
- Primary matched system
- Salina, City Of
- Source water
- Surface water + Groundwater
- County
- Saline County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0033 mg/L
22% of action level
Utility match
4 systems
Serves 46,481 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
166 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
166
mg/L as CaCO₃ equivalent
Grains per gallon
9.7
1 GPG ≈ 17.1 PPM
What this means at home
At 166 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
9
Nearest site
29.3 mi
Observation range
Jan 19, 2016–Jun 3, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SMOKY HILL R AT ENTERPRISE, KS (Stream).USGS source documentation ↗
Regional context
Is 67401 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Salina median
166 PPM
About the same1 indexed ZIP readings · Range 166–166 PPM
Kansas median
289 PPM
123 PPM lower540 indexed ZIP readings · Range 72.2–707 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.0033 mg/L
Reported Dec 31, 2025
Copper (CU90)
1.5 mg/L
Reported Dec 31, 2014
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0033
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 1.5
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 89
- Health-based
- 1
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | KS2016910 | Resolved | Jan 1, 2026through Jan 31, 2026 |
| Chlorine | KS2016910 | Resolved | Jan 1, 2026through Jan 31, 2026 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Dec 1, 2025through Dec 31, 2025 |
| Chlorine | KS2016910 | Resolved | Dec 1, 2025through Dec 31, 2025 |
| Chlorine | KS2016910 | Resolved | Nov 1, 2025through Nov 30, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Nov 1, 2025through Nov 30, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Oct 1, 2025through Oct 31, 2025 |
| Chlorine | KS2016910 | Resolved | Oct 1, 2025through Oct 31, 2025 |
| Chlorine | KS2016910 | Resolved | Sep 1, 2025through Sep 30, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Sep 1, 2025through Sep 30, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Aug 1, 2025through Aug 31, 2025 |
| Chlorine | KS2016910 | Resolved | Aug 1, 2025through Aug 31, 2025 |
| LEAD AND COPPER RULE REVISIONS | KS2016913 | Unaddressed | Jul 2, 2025 |
| LEAD AND COPPER RULE REVISIONS | KS2016910 | Unaddressed | Jul 2, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Jul 1, 2025through Jul 31, 2025 |
| Chlorine | KS2016910 | Resolved | Jul 1, 2025through Jul 31, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | Jun 1, 2025through Jun 30, 2025 |
| Chlorine | KS2016910 | Resolved | Jun 1, 2025through Jun 30, 2025 |
| Chlorine | KS2016910 | Resolved | May 1, 2025through May 31, 2025 |
| Revised Total Coliform Rule | KS2016910 | Resolved | May 1, 2025through May 31, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Salina ZIP 67401 using 166 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
166 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Salina
Is tap water safe in Salina?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 166 PPM, or 9.7 grains per gallon, classified as hard. This is not a household tap measurement.
Do I need a water softener?+
At 166 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.