Skip to content

Local water dashboard

Official source aggregation

Water quality in Stafford, KS 67578

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Stafford County.

3 active health-based violations
Primary matched system
Stafford, City Of
Source water
Groundwater
County
Stafford County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

300 PPM · 17.5 GPG

Compliance screen

Review needed

3 active health-based records

Lead 90th percentile

0.0017 mg/L

11% of action level

Utility match

1 system

Serves 936 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

300 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

300

mg/L as CaCO₃ equivalent

Grains per gallon

17.5

1 GPG ≈ 17.1 PPM

What this means at home

At 300 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

107

Nearest site

35 mi

Observation range

Mar 29, 2016–May 6, 2021

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 23S 06W 03AABA01 (Well).USGS source documentation ↗

Regional context

Is 67578 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Stafford median

300 PPM

About the same

1 indexed ZIP readings · Range 300–300 PPM

Kansas median

289 PPM

11 PPM higher

540 indexed ZIP readings · Range 72.2–707 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0017 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0017

EPA limit 0.015

Local level is 11% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
8
Health-based
3
Active health-based
3
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleKS2018503ArchivedJul 1, 2025through Jul 31, 2025
ChlorineKS2018503ArchivedJul 1, 2025through Jul 31, 2025
Groundwater RuleHealth-basedKS2018503UnaddressedJul 22, 2023
Groundwater RuleHealth-basedKS2018503UnaddressedJul 22, 2023
Groundwater RuleHealth-basedKS2018503UnaddressedJul 22, 2023
Groundwater RuleKS2018503UnaddressedApr 23, 2023
Lead and Copper RuleKS2018503ResolvedApr 1, 2022through Sep 20, 2021
Lead and Copper RuleKS2018503ResolvedSep 29, 2021through Feb 22, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Stafford ZIP 67578 using 300 PPM nearby hardness and 1 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

300 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Groundwater Rule has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Stafford

Is tap water safe in Stafford?+

EPA ECHO reports 3 active health-based violations among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.

How hard is the water?+

Nearby USGS observations produce an estimate of 300 PPM, or 17.5 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 300 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.