Hardness
Moderately Hard
78 PPM · 4.6 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Worcester County.
At a glance
EPA quarter 2026Q2
Hardness
Moderately Hard
78 PPM · 4.6 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 6,500 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
78 PPM
Parts per million
78
mg/L as CaCO₃ equivalent
Grains per gallon
4.6
1 GPG ≈ 17.1 PPM
What this means at home
At 78 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
150
Nearest site
1.8 mi
Observation range
Jan 13, 2016–Sep 25, 2023
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MA-AYW 43 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Devens median
75 PPM
About the same2 indexed ZIP readings · Range 71.4–78 PPM
Massachusetts median
49 PPM
29 PPM higher328 indexed ZIP readings · Range 24.3–128 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Jun 30, 2025
Copper (CU90)
1.8 mg/L
Reported Dec 31, 2006
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in mg/L
Local 1.8
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | MA2019001 | Resolved | Aug 1, 2021through Aug 31, 2021 |
| TTHM | MA2019001 | Resolved | Aug 1, 2021through Aug 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Devens ZIP 01434 using 78 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 78 PPM, or 4.6 grains per gallon, classified as moderately hard. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.