Skip to content

Local water dashboard

Official source aggregation

Water quality in Littleton Common, MA 01460

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Middlesex County.

1 reported benchmark flag
Primary matched system
Littleton Water Department
Source water
Groundwater
County
Middlesex County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

70.4 PPM · 4.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 9,307 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

70.4 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

70.4

mg/L as CaCO₃ equivalent

Grains per gallon

4.1

1 GPG ≈ 17.1 PPM

What this means at home

At 70.4 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

144

Nearest site

1.6 mi

Observation range

Jan 13, 2016–Sep 25, 2023

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MA-LWW 171 LITTLETON, MA (Well).USGS source documentation ↗

Regional context

Is 01460 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Littleton Common median

70 PPM

About the same

1 indexed ZIP readings · Range 70.4–70.4 PPM

Massachusetts median

49 PPM

21 PPM higher

328 indexed ZIP readings · Range 24.3–128 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

1.7 mg/L

Reported Jun 30, 2010

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.7

EPA limit 1.3

Local level is 131% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleMA2158000ResolvedJul 1, 2023through Feb 29, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Littleton Common ZIP 01460 using 70.4 PPM nearby hardness and 2 reported measurement benchmarks.

1 match

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Littleton Common

Is tap water safe in Littleton Common?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 70.4 PPM, or 4.1 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.