Skip to content

Local water dashboard

Official source aggregation

Water quality in Lowell, MA 01824

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Middlesex County.

No active health-based violation reported
Primary matched system
Chelmsford Water District
Source water
Groundwater + Surface water
County
Middlesex County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

69.9 PPM · 4.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0024 mg/L

16% of action level

Utility match

2 systems

Serves 28,750 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

69.9 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

69.9

mg/L as CaCO₃ equivalent

Grains per gallon

4.1

1 GPG ≈ 17.1 PPM

What this means at home

At 69.9 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

132

Nearest site

3 mi

Observation range

Jan 13, 2016–Sep 25, 2023

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MA-CHW 580 (Well).USGS source documentation ↗

Regional context

Is 01824 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Lowell median

56 PPM

14 PPM higher

2 indexed ZIP readings · Range 41.6–69.9 PPM

Massachusetts median

49 PPM

21 PPM higher

328 indexed ZIP readings · Range 24.3–128 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0024 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0024

EPA limit 0.015

Local level is 16% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleMA3056001AddressedJul 1, 2018

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Lowell ZIP 01824 using 69.9 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Lowell

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Lowell reports →

Frequently asked

Water questions for Lowell

Is tap water safe in Lowell?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 69.9 PPM, or 4.1 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.