Hardness
Soft
35.3 PPM · 2.1 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Barnstable County.
At a glance
EPA quarter 2026Q2
Hardness
Soft
35.3 PPM · 2.1 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 80 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
35.3 PPM
Parts per million
35.3
mg/L as CaCO₃ equivalent
Grains per gallon
2.1
1 GPG ≈ 17.1 PPM
What this means at home
At 35.3 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
75
Nearest site
30.4 mi
Observation range
Jan 13, 2016–Sep 25, 2023
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MA-PWW 411 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Truro median
35 PPM
About the same1 indexed ZIP readings · Range 35.3–35.3 PPM
Massachusetts median
49 PPM
14 PPM lower328 indexed ZIP readings · Range 24.3–128 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Jun 30, 2025
Copper (CU90)
2.705 mg/L
Reported Jun 30, 2021
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in mg/L
Local 2.705
EPA limit 1.3
100% line = listed limit
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Truro ZIP 02652 using 35.3 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 35.3 PPM, or 2.1 grains per gallon, classified as soft. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.