Hardness
Soft
50.5 PPM · 3 GPG
Local water dashboard
Official source aggregationWater quality in Bingham, ME 04920
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Somerset County.
1 reported benchmark flag
- Primary matched system
- Bingham Water District
- Source water
- Groundwater
- County
- Somerset County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0035 mg/L
23% of action level
Utility match
1 system
Serves 1,075 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
50.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
50.5
mg/L as CaCO₃ equivalent
Grains per gallon
3
1 GPG ≈ 17.1 PPM
What this means at home
At 50.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
3
Nearest site
5.7 mi
Observation range
Aug 21, 2019–Oct 11, 2023
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: ME-SMW 86 (Well).USGS source documentation ↗
Regional context
Is 04920 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Bingham median
51 PPM
About the same1 indexed ZIP readings · Range 50.5–50.5 PPM
Maine median
39 PPM
12 PPM higher122 indexed ZIP readings · Range 3.2–94.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.0035 mg/L
Reported Dec 31, 2025
Copper (CU90)
1.73 mg/L
Reported Dec 31, 2019
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0035
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 1.73
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 1
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Lead and Copper Rule | ME0090180 | Resolved | Oct 1, 2021through Jun 29, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Bingham ZIP 04920 using 50.5 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Bingham
Is tap water safe in Bingham?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 50.5 PPM, or 3 grains per gallon, classified as soft. This is not a household tap measurement.
Do I need a water softener?+
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.