Hardness
Hard
152 PPM · 8.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Menominee County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
152 PPM · 8.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0037 mg/L
25% of action level
Utility match
1 system
Serves 200 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
152 PPM
Parts per million
152
mg/L as CaCO₃ equivalent
Grains per gallon
8.9
1 GPG ≈ 17.1 PPM
What this means at home
At 152 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
14
Nearest site
27.7 mi
Observation range
Aug 21, 2023–Sep 12, 2024
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MT-33/21E/20-0258 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Carney median
152 PPM
About the same1 indexed ZIP readings · Range 152–152 PPM
Michigan median
283 PPM
131 PPM lower504 indexed ZIP readings · Range 41.3–459.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0037 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0037
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | MI0001125 | Resolved | Jul 1, 2022through Sep 19, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Carney ZIP 49812 using 152 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
152 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 152 PPM, or 8.9 grains per gallon, classified as hard. This is not a household tap measurement.
At 152 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.