Hardness
Very Hard
255.5 PPM · 14.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wayne County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
255.5 PPM · 14.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0075 mg/L
50% of action level
Utility match
2 systems
Serves 633,218 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
255.5 PPM
Parts per million
255.5
mg/L as CaCO₃ equivalent
Grains per gallon
14.9
1 GPG ≈ 17.1 PPM
What this means at home
At 255.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
2
Nearest site
17.8 mi
Observation range
Jan 7, 2016–Jun 9, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: CLINTON RIVER AT STERLING HEIGHTS, MI (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Detroit median
256 PPM
About the same31 indexed ZIP readings · Range 228–255.5 PPM
Michigan median
283 PPM
27 PPM lower504 indexed ZIP readings · Range 41.3–459.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0075 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0075
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Surface Water Treatment Rule | MI0002838 | Resolved | Sep 1, 2024through Sep 2, 2024 |
| CARBON, TOTALHealth-based | MI0002838 | Resolved | Jan 1, 2024through Mar 31, 2024 |
| CARBON, TOTALHealth-based | MI0002838 | Resolved | Oct 1, 2023through Dec 31, 2023 |
| CARBON, TOTALHealth-based | MI0002838 | Resolved | Jul 1, 2023through Sep 30, 2023 |
| Bromate | MI0002838 | Resolved | Jan 1, 2022through Mar 31, 2022 |
| Interim Enhanced Surface Water Treatment Rule | MI0002838 | Resolved | Aug 1, 2021through Aug 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Detroit ZIP 48227 using 255.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
255.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 255.5 PPM, or 14.9 grains per gallon, classified as very hard. This is not a household tap measurement.
At 255.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.