Skip to content

Local water dashboard

Official source aggregation

Water quality in Wayne, MI 48184

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wayne County.

No active health-based violation reported
Primary matched system
Westland
Source water
Surface water
County
Wayne County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

240 PPM · 14 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

2 systems

Serves 85,420 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

240 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

240

mg/L as CaCO₃ equivalent

Grains per gallon

14

1 GPG ≈ 17.1 PPM

What this means at home

At 240 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

3

Nearest site

30.1 mi

Observation range

Jan 7, 2016–Jun 9, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: CLINTON RIVER AT STERLING HEIGHTS, MI (Stream).USGS source documentation ↗

Regional context

Is 48184 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Wayne median

240 PPM

About the same

1 indexed ZIP readings · Range 240–240 PPM

Michigan median

283 PPM

43 PPM lower

504 indexed ZIP readings · Range 41.3–459.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
9
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleMI0006950ResolvedOct 1, 2025through Oct 23, 2025
Lead and Copper RuleMI0006950ResolvedJul 1, 2025through Dec 20, 2025
Lead and Copper RuleMI0006950ResolvedJan 1, 2025through Dec 20, 2025
Consumer Confidence RuleMI0007040ResolvedJul 1, 2023through Jul 5, 2023
TTHMMI0006950ResolvedApr 1, 2023through Jun 30, 2023
Total Haloacetic Acids (HAA5)MI0006950ResolvedApr 1, 2023through Jun 30, 2023
Consumer Confidence RuleMI0007040ResolvedJul 1, 2022through Aug 31, 2022
Total Haloacetic Acids (HAA5)MI0007040ResolvedApr 1, 2022through Jun 30, 2022
TTHMMI0007040ResolvedApr 1, 2022through Jun 30, 2022

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Wayne ZIP 48184 using 240 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

240 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Wayne

Is tap water safe in Wayne?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 240 PPM, or 14 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 240 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.