Hardness
Very Hard
670.5 PPM · 39.2 GPG
Local water dashboard
Official source aggregationWater quality in Fergus Falls, MN 56537
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Otter Tail County.
No active health-based violation reported
- Primary matched system
- Fergus Falls
- Source water
- Surface water
- County
- Otter Tail County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.008 mg/L
53% of action level
Utility match
1 system
Serves 14,194 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
670.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
670.5
mg/L as CaCO₃ equivalent
Grains per gallon
39.2
1 GPG ≈ 17.1 PPM
What this means at home
At 670.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
18
Nearest site
30.8 mi
Observation range
Jan 4, 2016–Jan 15, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: ANTELOPE CREEK AT DWIGHT, ND (Stream).USGS source documentation ↗
Regional context
Is 56537 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Fergus Falls median
671 PPM
About the same1 indexed ZIP readings · Range 670.5–670.5 PPM
Minnesota median
318 PPM
353 PPM higher319 indexed ZIP readings · Range 46.1–716 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.008 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.008
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 0
- Health-based
- 0
- Active health-based
- 0
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Fergus Falls ZIP 56537 using 670.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
670.5 PPM is 6× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Fergus Falls
Is tap water safe in Fergus Falls?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 670.5 PPM, or 39.2 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 670.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.