Hardness
Very Hard
188.5 PPM · 11 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wadena County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
188.5 PPM · 11 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 4,332 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
188.5 PPM
Parts per million
188.5
mg/L as CaCO₃ equivalent
Grains per gallon
11
1 GPG ≈ 17.1 PPM
What this means at home
At 188.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
8
Nearest site
40.5 mi
Observation range
Sep 11, 2017–Sep 24, 2024
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MW-01 UMN Hydrogeology Field Site 0000569489 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Wadena median
189 PPM
About the same1 indexed ZIP readings · Range 188.5–188.5 PPM
Minnesota median
318 PPM
129 PPM lower319 indexed ZIP readings · Range 46.1–716 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2023
Copper (CU90)
1.38 mg/L
Reported Dec 31, 2016
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in mg/L
Local 1.38
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Lead and Copper Rule | MN1800004 | Resolved | Jan 1, 2025through Jun 30, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Wadena ZIP 56482 using 188.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
188.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 188.5 PPM, or 11 grains per gallon, classified as very hard. This is not a household tap measurement.
At 188.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.