Skip to content

Local water dashboard

Official source aggregation

Water quality in Marquand, MO 63655

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Madison County.

No active health-based violation reported
Primary matched system
Marquand Pws
Source water
Groundwater
County
Madison County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

212 PPM · 12.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 253 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

212 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

212

mg/L as CaCO₃ equivalent

Grains per gallon

12.4

1 GPG ≈ 17.1 PPM

What this means at home

At 212 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

19

Nearest site

28.9 mi

Observation range

Mar 1, 2016–Aug 23, 2023

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 031-MO4024100-12331 (Well).USGS source documentation ↗

Regional context

Is 63655 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Marquand median

212 PPM

About the same

1 indexed ZIP readings · Range 212–212 PPM

Missouri median

236 PPM

24 PPM lower

556 indexed ZIP readings · Range 38.3–483 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Public NoticeMO4010501ResolvedOct 1, 2025through Oct 21, 2025
LEAD AND COPPER RULE REVISIONSMO4010501UnaddressedJul 2, 2025
Revised Total Coliform RuleMO4010501ResolvedAug 1, 2024through Aug 31, 2024
Lead and Copper RuleMO4010501UnaddressedDec 30, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Marquand ZIP 63655 using 212 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

212 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Marquand

Is tap water safe in Marquand?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 212 PPM, or 12.4 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 212 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.