Hardness
Very Hard
212 PPM · 12.4 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Sunflower County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
212 PPM · 12.4 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0016 mg/L
11% of action level
Utility match
1 system
Serves 2,300 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
212 PPM
Parts per million
212
mg/L as CaCO₃ equivalent
Grains per gallon
12.4
1 GPG ≈ 17.1 PPM
What this means at home
At 212 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
78
Nearest site
6.5 mi
Observation range
Aug 15, 2016–Aug 9, 2023
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 133C0150 SUNFLOWER (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Drew median
212 PPM
About the same1 indexed ZIP readings · Range 212–212 PPM
Mississippi median
66 PPM
146 PPM higher146 indexed ZIP readings · Range 11.8–2560 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0016 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0016
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | MS0670004 | Resolved | Jul 1, 2025through Jul 21, 2025 |
| LEAD AND COPPER RULE REVISIONS | MS0670004 | Resolved | Oct 17, 2024through Nov 6, 2024 |
| LEAD AND COPPER RULE REVISIONSHealth-based | MS0670004 | Resolved | Oct 17, 2024through Nov 6, 2024 |
| Public Notice | MS0670004 | Resolved | Feb 9, 2024through Dec 24, 2025 |
| Public Notice | MS0670004 | Resolved | Feb 9, 2024through Dec 24, 2025 |
| Public Notice | MS0670004 | Resolved | Feb 9, 2024through Dec 24, 2025 |
| Public Notice | MS0670004 | Unaddressed | Feb 16, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Drew ZIP 38737 using 212 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
212 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 212 PPM, or 12.4 grains per gallon, classified as very hard. This is not a household tap measurement.
At 212 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.