Skip to content

Local water dashboard

Official source aggregation

Water quality in Flowood, MS 39047

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Rankin County.

No active health-based violation reported
Primary matched system
City Of Flowood
Source water
Groundwater
County
Rankin County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

248 PPM · 14.5 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0016 mg/L

11% of action level

Utility match

2 systems

Serves 31,574 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

248 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

248

mg/L as CaCO₃ equivalent

Grains per gallon

14.5

1 GPG ≈ 17.1 PPM

What this means at home

At 248 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

26

Nearest site

16.9 mi

Observation range

Aug 15, 2016–May 3, 2022

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 121M0060 RANKIN (Well).USGS source documentation ↗

Regional context

Is 39047 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Flowood median

255 PPM

7 PPM lower

2 indexed ZIP readings · Range 248–262.5 PPM

Mississippi median

66 PPM

182 PPM higher

146 indexed ZIP readings · Range 11.8–2560 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0016 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0016

EPA limit 0.015

Local level is 11% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
ChlorineMS0610075ResolvedApr 1, 2024through Jun 30, 2024
Revised Total Coliform RuleMS0610075ResolvedApr 1, 2024through Apr 22, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Flowood ZIP 39047 using 248 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

248 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Flowood

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Flowood reports →

Frequently asked

Water questions for Flowood

Is tap water safe in Flowood?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 248 PPM, or 14.5 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 248 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.