Skip to content

Local water dashboard

Official source aggregation

Water quality in Greenville, MS 38703

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Washington County.

2 reported benchmark flags
Primary matched system
City Of Greenville
Source water
Groundwater
County
Washington County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

251.5 PPM · 14.7 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0011 mg/L

7% of action level

Utility match

2 systems

Serves 29,602 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

251.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

251.5

mg/L as CaCO₃ equivalent

Grains per gallon

14.7

1 GPG ≈ 17.1 PPM

What this means at home

At 251.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

74

Nearest site

13 mi

Observation range

Aug 15, 2016–Aug 9, 2023

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 151F0195 WASHINGTON (Leland) (Well).USGS source documentation ↗

Regional context

Is 38703 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Greenville median

251 PPM

About the same

2 indexed ZIP readings · Range 251–251.5 PPM

Mississippi median

66 PPM

186 PPM higher

146 indexed ZIP readings · Range 11.8–2560 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass2 fail

Lead (PB90)

0.0011 mg/L

Reported Dec 31, 2025

Copper (CU90)

5.9861 mg/L

Reported Dec 31, 2022

Numerical coverage

3 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0011

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 5.9861

EPA limit 1.3

Local level is 460% of the listed EPA limit.

TTHM

Measured in MG/L

Fail

Local 0.087

EPA limit 0.08

Local level is 109% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
2
Active health-based
0
Contaminant or ruleSystemStatusPeriod
TTHMHealth-basedReported 0.087 MG/L · MCL 0.08MS0760004ResolvedJan 1, 2022through Mar 31, 2022
TTHMHealth-basedReported 0.086 MG/L · MCL 0.08MS0760004ResolvedOct 1, 2021through Dec 31, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Greenville ZIP 38703 using 251.5 PPM nearby hardness and 3 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

251.5 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), TTHM have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Greenville

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Greenville reports →

Frequently asked

Water questions for Greenville

Is tap water safe in Greenville?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 251.5 PPM, or 14.7 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 251.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.