Hardness
Very Hard
308 PPM · 18 GPG
Local water dashboard
Official source aggregationWater quality in Flaxville, MT 59222
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Daniels County.
1 reported benchmark flag
- Primary matched system
- Flaxville Town Of
- Source water
- Surface water
- County
- Daniels County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 82 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
308 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
308
mg/L as CaCO₃ equivalent
Grains per gallon
18
1 GPG ≈ 17.1 PPM
What this means at home
At 308 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
85
Nearest site
8.6 mi
Observation range
Jul 6, 2016–Sep 25, 2024
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 33N49E24CCDC01 (Well).USGS source documentation ↗
Regional context
Is 59222 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Flaxville median
308 PPM
About the same1 indexed ZIP readings · Range 308–308 PPM
Montana median
122 PPM
186 PPM higher129 indexed ZIP readings · Range 0.2–799.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0 mg/L
Reported Dec 31, 2024
Copper (CU90)
1.55 mg/L
Reported Dec 31, 1993
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 1.55
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 15
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | MT0000549 | Resolved | Mar 1, 2026through Mar 31, 2026 |
| Revised Total Coliform Rule | MT0000549 | Resolved | Jan 1, 2026through Jan 31, 2026 |
| Revised Total Coliform Rule | MT0000549 | Resolved | Nov 1, 2025through Nov 30, 2025 |
| TTHM | MT0000549 | Archived | Jan 1, 2025through Dec 31, 2025 |
| Total Haloacetic Acids (HAA5) | MT0000549 | Archived | Jan 1, 2025through Dec 31, 2025 |
| Lead and Copper Rule | MT0000549 | Resolved | Dec 30, 2024through Jul 23, 2025 |
| Consumer Confidence Rule | MT0000549 | Resolved | Oct 1, 2024through Apr 30, 2025 |
| Consumer Confidence Rule | MT0000549 | Resolved | Jul 1, 2024through Apr 30, 2025 |
| TTHM | MT0000549 | Archived | Jan 1, 2024through Dec 31, 2024 |
| Total Haloacetic Acids (HAA5) | MT0000549 | Archived | Jan 1, 2024through Dec 31, 2024 |
| Lead and Copper Rule | MT0000549 | Resolved | Apr 1, 2022through Jul 23, 2025 |
| Total Haloacetic Acids (HAA5) | MT0000549 | Resolved | Jan 1, 2022through Aug 31, 2022 |
| TTHM | MT0000549 | Resolved | Jan 1, 2022through Aug 31, 2022 |
| TTHM | MT0000549 | Resolved | Apr 1, 2021through Jun 30, 2021 |
| Total Haloacetic Acids (HAA5) | MT0000549 | Resolved | Apr 1, 2021through Jun 30, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Flaxville ZIP 59222 using 308 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
308 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Flaxville
Is tap water safe in Flaxville?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 308 PPM, or 18 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 308 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.