Skip to content

Local water dashboard

Official source aggregation

Water quality in Medicine Lake, MT 59247

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Sheridan County.

1 reported benchmark flag
Primary matched system
Medicine Lake Town Of
Source water
Surface water
County
Sheridan County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

360 PPM · 21.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.01 mg/L

67% of action level

Utility match

1 system

Serves 600 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

360 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

360

mg/L as CaCO₃ equivalent

Grains per gallon

21.1

1 GPG ≈ 17.1 PPM

What this means at home

At 360 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

4

Nearest site

46.5 mi

Observation range

Jan 12, 2016–May 27, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: LITTLE MUDDY RIVER BL COW CREEK NR WILLISTON, ND (Stream).USGS source documentation ↗

Regional context

Is 59247 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Medicine Lake median

360 PPM

About the same

1 indexed ZIP readings · Range 360–360 PPM

Montana median

122 PPM

238 PPM higher

129 indexed ZIP readings · Range 0.2–799.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.01 mg/L

Reported Dec 31, 2024

Copper (CU90)

1.93 mg/L

Reported Jun 30, 2016

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.01

EPA limit 0.015

Local level is 67% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.93

EPA limit 1.3

Local level is 148% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
0
Health-based
0
Active health-based
0

No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Medicine Lake ZIP 59247 using 360 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

360 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Medicine Lake

Is tap water safe in Medicine Lake?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 360 PPM, or 21.1 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 360 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.