Skip to content

Local water dashboard

Official source aggregation

Water quality in Red Lodge, MT 59068

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Carbon County.

No active health-based violation reported
Primary matched system
Red Lodge Water Dept
Source water
Groundwater
County
Carbon County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

111.2 PPM · 6.5 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.003 mg/L

20% of action level

Utility match

3 systems

Serves 2,000 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

111.2 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

111.2

mg/L as CaCO₃ equivalent

Grains per gallon

6.5

1 GPG ≈ 17.1 PPM

What this means at home

At 111.2 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

16

Nearest site

19.4 mi

Observation range

Jan 13, 2016–Feb 28, 2025

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: DAISY PASS SNOW SITE, MT (Land).USGS source documentation ↗

Regional context

Is 59068 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Red Lodge median

111 PPM

About the same

1 indexed ZIP readings · Range 111.2–111.2 PPM

Montana median

122 PPM

11 PPM lower

129 indexed ZIP readings · Range 0.2–799.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.003 mg/L

Reported Jun 30, 2026

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.003

EPA limit 0.015

Local level is 20% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
3
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Groundwater RuleMT0000063ResolvedMay 1, 2022through May 31, 2022
Revised Total Coliform RuleMT0000314ResolvedSep 1, 2021through Sep 30, 2021
Consumer Confidence RuleMT0000314ResolvedJul 1, 2021through Jul 26, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Red Lodge ZIP 59068 using 111.2 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Red Lodge

Is tap water safe in Red Lodge?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 111.2 PPM, or 6.5 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.