Skip to content

Local water dashboard

Official source aggregation

Water quality in Stevensville, MT 59870

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Ravalli County.

1 active health-based violation
Primary matched system
Stevensville Town Of
Source water
Groundwater
County
Ravalli County
Profile updated

At a glance

What the current records say

Hardness

Hard

124 PPM · 7.3 GPG

Compliance screen

Review needed

1 active health-based record

Lead 90th percentile

0.001 mg/L

7% of action level

Utility match

3 systems

Serves 2,090 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

124 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

124

mg/L as CaCO₃ equivalent

Grains per gallon

7.3

1 GPG ≈ 17.1 PPM

What this means at home

At 124 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

33

Nearest site

24.4 mi

Observation range

Mar 4, 2016–Jun 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Clark Fork at Turah Bridge nr Bonner MT (Stream).USGS source documentation ↗

Regional context

Is 59870 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Stevensville median

124 PPM

About the same

1 indexed ZIP readings · Range 124–124 PPM

Montana median

122 PPM

About the same

129 indexed ZIP readings · Range 0.2–799.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.001 mg/L

Reported Dec 31, 2025

Copper (CU90)

1.39 mg/L

Reported Dec 31, 2007

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.001

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.39

EPA limit 1.3

Local level is 107% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
8
Health-based
1
Active health-based
1
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleHealth-basedMT0002132UnaddressedDec 13, 2025
Revised Total Coliform RuleMT0000335ResolvedSep 1, 2023through Sep 30, 2023
Consumer Confidence RuleMT0000335ResolvedJul 1, 2023through Jul 12, 2023
Revised Total Coliform RuleMT0000335ResolvedOct 1, 2022through Oct 31, 2022
E. COLIMT0002132ResolvedSep 20, 2022through Sep 20, 2022
Consumer Confidence RuleMT0000335ResolvedJul 1, 2022through Aug 11, 2022
Revised Total Coliform RuleMT0000335ResolvedJan 1, 2022through Feb 16, 2020
Lead and Copper RuleMT0000335ResolvedDec 30, 2021through Jan 20, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Stevensville ZIP 59870 using 124 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

124 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), Revised Total Coliform Rule have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Stevensville

Is tap water safe in Stevensville?+

EPA ECHO reports 1 active health-based violation among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.

How hard is the water?+

Nearby USGS observations produce an estimate of 124 PPM, or 7.3 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 124 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.