Skip to content

Local water dashboard

Official source aggregation

Water quality in Bunn, NC 27508

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Franklin County.

No active health-based violation reported
Primary matched system
Lake Royale S/d
Source water
Surface water + Groundwater
County
Franklin County
Profile updated

At a glance

What the current records say

Hardness

Soft

39.8 PPM · 2.3 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

9.0e-4 mg/L

6% of action level

Utility match

6 systems

Serves 5,890 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

39.8 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

39.8

mg/L as CaCO₃ equivalent

Grains per gallon

2.3

1 GPG ≈ 17.1 PPM

What this means at home

At 39.8 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

54

Nearest site

19.3 mi

Observation range

Jan 14, 2016–Jun 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: PERRY CR TRIB AT HIKING TR NR NEUSE CROSSROADS, NC (Stream).USGS source documentation ↗

Regional context

Is 27508 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Bunn median

40 PPM

About the same

1 indexed ZIP readings · Range 39.8–39.8 PPM

North Carolina median

41 PPM

About the same

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

9.0e-4 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 9.0e-4

EPA limit 0.015

Local level is 6% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
21
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleNC0235108AddressedOct 1, 2025
TTHMNC0235108ResolvedJul 1, 2025through Sep 30, 2025
Total Haloacetic Acids (HAA5)NC0235108ResolvedJul 1, 2025through Sep 30, 2025
Lead and Copper RuleNC0235025AddressedJan 1, 2025
TTHMNC0235108ResolvedOct 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)NC0235108ResolvedOct 1, 2024through Dec 31, 2024
Total Haloacetic Acids (HAA5)NC0235108ResolvedJul 1, 2024through Sep 30, 2024
Consumer Confidence RuleNC0235108ResolvedJul 1, 2024through Nov 14, 2024
TTHMNC0235108ResolvedJul 1, 2024through Sep 30, 2024
Revised Total Coliform RuleNC0235129ResolvedJun 11, 2024through Jun 11, 2024
TTHMNC0235129ResolvedApr 1, 2024through Jun 30, 2024
Total Haloacetic Acids (HAA5)NC0235129ResolvedApr 1, 2024through Jun 30, 2024
NitrateNC0235129ResolvedJan 1, 2024through Dec 31, 2024
Revised Total Coliform RuleNC0235108AddressedNov 1, 2023
Revised Total Coliform RuleNC0235108ResolvedDec 11, 2022through Jan 10, 2023
Revised Total Coliform RuleNC0235108ResolvedOct 1, 2022through Nov 15, 2022
Total Haloacetic Acids (HAA5)NC0235108ResolvedMar 1, 2022through May 31, 2022
Lead and Copper RuleNC0235025ResolvedJan 1, 2022through Mar 23, 2022
TTHMNC0235025ResolvedSep 1, 2021through Nov 30, 2021
Total Haloacetic Acids (HAA5)NC0235025ResolvedSep 1, 2021through Nov 30, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Bunn ZIP 27508 using 39.8 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Bunn

Is tap water safe in Bunn?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 39.8 PPM, or 2.3 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.